Signal Conditioners and Barriers
|
 |
Product Information |
| |
| |
IPC 704: Charge Amplifier
A small charge amplifier (signal conditioner) for CA accelerometers and CP dynamic pressure sensors. |
| |
» Screw terminal connections
» User configurable high and low pass filters
» Optional integrator
» Select 2-wire current or 3-wire voltage signal transmission
» Exi version available
- Symmetrical charge amplifier
- Pass-band selectable between 0.5 Hz to 20 kHz
- Max input signal 10000 pC
- Current output to ±5mA
- Voltage output to ±5V
- 18 to 30 VDC power
- ABA 160 housing available for IPC 704 unit
|
download datasheet
|
| |
|
| |
IQS 45X
Signal Conditioners for TQ 4xx series of proximity probes. This product is fully described in the TQ 4xx series of datasheets. |
| |
» Conforms to API670 recommendations
» Exi version available
» Short circuit protected
» Voltage or current output
- -24 VDC power supply
- Operating temp -30°C to 70°C
- Housings available for 1, 3, 5, 6 or 10 units
|
|
| |
|
| |
OPR 706
Tachometer signal conditioner and one-per-revolution pulse extractor. |
| |
» Suitable for magnetic speed probes
» Dual conditioned digital outputs: 1/rev and tachometer
» Very low phase error
download datasheet
|
|
| |
|
| |
GSI 122, 123, 124, 130 and GSV 14x
Galvanic separation units (GSI series) and power supply and safety barrier unit (GSV 14x).
The GSI units are intended for vibration, dynamic pressure, and proximity signal chains. They relay power from the monitoring system to the transducer chain, and convert the two wire current modulated signal to a voltage signal suitable for monitors and data acquisition systems. They provide complete galvanic isolation between the input and output.
The GSV 14x unit provides signal conversion and isolation, while including a power supply. It is intended for use in proximity systems.
|
| |
|
| |
GSI 122
» For vibration and pressure systems
» Exi version suitable for use in explosive atmospheres
- +24 VDC power supply from monitoring system
- Provides 4 kV isolation
- DIN rail mounting accessories available
download datasheet
|
|
| |
|
| |
GSI 123
» For proximity probe systems
» Suitable for use in explosive atmospheres
- -24 VDC power supply from monitoring systems
- Provides 2 kV isolation
- DIN rail mounting accessories available
download datasheet
|
|
| |
|
| |
GSI 124
» Replaces GSI 122, GSI 123, and GSI 130
- Power supply for 2-wires types of transducers and signal conditioners
- µA to mV conversion for long distance signal transmission
- Certified for use with measuring chains in potentially explosive atmospheres
- Galvanic separation voltage: 4.kVRMS
- High rejection of frame voltage
- DIN-Rail mounting
download datasheet
|
|
| |
|
| |
GSI 130
» For vibration and pressure systems
» Cannot be used in explosive atmosphere
- +24 VDC power supply from monitoring system
- Provides 4 kV isolation
- DIN rail mounting accessories available
download datasheet
|
|
| |
|
| |
GSV 14x
» Power supply and safety barrier for proximity systems requiring an independent power suppply
- GSV 140 accepts 180-250 VAC, 50/60 Hz
- GSV 141 accepts 93-133 VAC, 50/60 Hz
- GSV 142 accepts +20 to +30 VDC or -20 to -30 VDC
- Provides 2 kV isolation
- DIN rail mounting accessories available
download datasheet
|
|
| |
|
| |
GSI/GSV Mounting Accessories
These accessories allow quick and secure mounting of GSI or GSV units on a DIN 46277/1 rail. The accessories can be ordered invididually and consist of the following:
» 19-inch DIN 46277/1 rail
» M4 nut assembly
» Ready-drilled aluminium bracket (100 mm x 152.4 mm) for 6 GSI or 4 GSV units
download datasheet
|
|
| |
|
| |
For further information, please contact: |
| |
Vibro-Meter SA
Rte de Moncor 4
CH-1701 Fribourg
Switzerland |
Tel: +41 26 407 11 11
Fax: +41 26 402 36 62
send email |
Home »
General »
Aerospace »
Industrial&Marine »
Space&Nuclear »
Site Map
|
