 |
VMU 100 (VibroSmart)
A single-channel, microprocessor-based vibration monitor for measuring and protecting individual machines or bearings. Designed for IPC-type accelerometers such as Vibro-Meter's CE680 series.
Features
- Rugged, compact IP65 industrial housing
- Measures vibration velocity, RMS or peak, metric or US units
- Bright five digit display
- Five LED status indicators
- User configurable sensor ranges, measuring ranges, high- and low-pass filters, time delay, and two alarm levels
- Optional DC output, 0-10 V or 4-20 mA. Optional RS output (RS-232C or RS-485, ModBus RTU) for remote configuration, status, and level reading
- Self check circuit (OK system) with relay
- Buffered analogue output (BNC connector) for analysers and data collectors
Specifications
- Accelerometer sensitivity from 9.5 to 105 mV/g in three ranges
- FSD 10 to 500 mm/s or 0.5 to 20 in/s in six ranges (max i/p 100g)
- Active LP filter; 40 Hz to 10 kHz in eight steps
- Active HP filter; 1 Hz to 200 Hz in eight steps
- Two NE or NDE alarm relays, latch or non-latch, 5% hysteresis
- Time delay 1 to 99 seconds
- Up to 31 VibroSmart VMU 100 units can be networked on a serial lilnk
- Input power from 115 VAC, 230 VAC, 20 to 30 VDC
download datasheet
|
